Back to Top
Signal Converter Transonic - Analog - Serial RS232-RS485 PV210
Start and Stop Converters for Input Signals:
- There is a start-stop input on the Transonic / Analog / Serial RS232/RS485 signal converter.
- It quickly converts the incoming transonic signals (± 10 V, 0/4... 20 mA) into analogue standard signals.
- The PV210 contains six control inputs and six outputs.
- Linearization can also be accomplished with the help of 24 control points.
Transonic, Analog, Serial, RS232/RS485 Signal Converter:
- Start-stop interface for magneto strictive sensors and absolute transducers.
- The frequency of the init pulses can be adjusted from 62.5 Hz to 5 kHz.
- Analog output: ±10 V, 0/4...20 mA, 16 bit.
- Power supply: 18–30 VDC.
- Compact housing that can be mounted on a 35 mm top-hat rail in accordance with EN 60715.
- Simple parameterization through the OS6.0 user interface.
- Serial interface (RS485/RS232).
- Pulse inputs A, B [HTL]; A, /A, B, /B [RS422, HTL].
- SSI input: DATA+, DATA-, CLOCK+, CLOCK- [RS422], 32-bit.
- USB interface and an RS232/RS485 interface for configuration and serial readout.
| Brand | Motrona |
|---|
Write Your Own Review
Write your content here...
