Back to Top
Single Axis Position Controller with 4 Relay Outputs PS641:
Single Axis Position Controller with 4 relay outputs:
- The PS641 Position Controller is a programmable, single-axis positioning controller.
- It has a short lag control and advanced calculation algorithms that enable the best precision in all single-axis applications using electrical or hydraulic 4-Q actuators with a set-point input of ±10 V.
- The PS641 Position Controller additionally offers several operating modes for absolute and relative positions (chain dimension) and grinding operations.
Single Axis Position Controller with 4 Relay Outputs:
- 2 pulse inputs, formatted as A, B, 90° [HTL] or A, /A, B, /B [RS422].
- 4 control inputs for HTL, PNP, NPN, and Namur signals (10... 30 VDC).
- Maximum input frequency of 300 kHz.
- 4 fast transistor outputs, short-circuit-proof, push-pull (5–30 VDC).
- 1 scalable 14-bit analogue output (±10 V or 0/4 … 20 mA).
- Loop time is approximately 250 µs.
- Defining incremental dimensions using a keyboard or the BCD decade switch on the front.
- Power supply: 17–40 VDC and 24 VAC.
- Compact norm panel housing (according to EN 60715).
- Using SM600 support brackets for top hat rail mounting is an option.
- Setup can be done with keys or on a PC using a serial RS232 interface.
- PROFIBUS connection through the Motrona PB251 gateway.
- Measurements: 96 x 96 x 140 mm (3.78 x 3.78 x 5.51").
| Brand | Motrona |
|---|
Write Your Own Review
Write your content here...
