Back to Top
Spectrum/Signal Analyzers, UTS3000-EMI
UTS3000T+ Series, Spectrum/Signal Analysers:
- The frequency measurement ranges from 9 kHz to 1.5 GHz, 3.2 GHz, 3.6 GHz, and 8.4 GHz.
- The display average noise level can be as low as -161 dBm (typical value).
- Phase noise is less than -98 dbc/Hz (average value at 10 kHz offset).
- Full amplitude accuracy is <0.7 db.
- Minimum resolution bandwidth (RBW): 1 Hz.
- Advanced function: one key measurement (optional).
- The EMI pre-compliance analysis function is optional.
- Analog demodulation analysis support is optional.
- Support the tracking of the source output function.
- 10.1-inch HD capacitive touch screen with a resolution of 1280 x 800.
Specifications:
- UTS3000T+ Series, Spectrum/Signal Analysers.
- EMI Analysis Option for the UTS3000B/T Series Spectrum Analysers.
- EMI Resolution Bandwidth:
- Resolution Bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz.
- Resolution Bandwidth Precision: < 5% (Nominal).
- EMI Detector: - Types: Peak, Negative Peak, Quasi Peak, EMI Average, Average.
- EMI Main Functions:
- Standards Supported: CISPR.
- View Options: Scan table, Meter, Signal table.
- Meter Control and Average Settings.
- Compliance Limits: AS-NZS, Bell Core, DEF-STAN, DO-160, EN, FCC, GB9254, MIL-461, VCCI, and Custom.
- Table Settings: Signal table settings, Scan table settings.
- Scan Sequences: Scan, Search, Scan-Search-Meas, Scan-Search, Search-Meas, Measure.
- Signal Detector.
- Output Reports.
| SKU | UTS3000-EMI |
|---|---|
| Brand | UNI-T |
Write Your Own Review
Write your content here...
