TRS 120VUC 1CO

ZAR 381.71
Out of stock
SKU
1122810000

TRS 120VUC 1CO:

  • 1 CO contact.
  • Contact material is AgNi.
  • Unique multi-voltage input from 24 to 230 V UC.
  • Input voltages range from 5 V DC to 230 V UC, with coloured markings: AC red, DC blue, and UC white.

Dimensions and weights:

  • Depth: 87.8 mm.
  • Depth (inches): 3.457 inch.
  • Height: 89.6 mm.
  • Height (inches): 3.528 inch.
  • Width: 6.4 mm.
  • Width (inches): 0.252 inch.
  • Net weight: 34 g.

Temperatures:

  • Storage temperature: -40 °C - 85 °C.
  • Operating temperature: -40 °C - 60 °C.
  • Humidity: 5-95% relative humidity, Tu = 40°C, without condensation.

Environmental Product Compliance:

  • REACH SVHC: Lead 7439-92-1.
  • SCIP: 9e2cbc49-76d9-4611-b8ec-5b4f549a0aa9.

Rated data UL:

  • Ambient temperature (operational), max.: 60 °C.
  • Connection cross-section AWG, min.: AWG 26.
  • Connection cross-section AWG, max.: AWG 14.
  • Type of conductor: rigid copper conductor, flexible copper conductor.
  • Tightening torque, max.: 0.4 Nm.
  • Pollution severity level: 2.

Control side:

  • Rated control voltage: 120 V DC ±10 %.
  • Rated current AC: 4 mA.
  • Rated current DC: 3.5 mA.
  • Power rating: 420 mW / 0.48 VA.
  • Status indicator: Green LED.
  • Protective circuit: Rectifier.
  • Coil voltage of the replacement relay deviating from the rated control voltage: Yes.
  • Coil voltage of the replacement relay: 60 V DC.

Load side:

  • Rated switching voltage: 250 V AC.
  • Continuous current: 6 A.
  • Max. switching frequency at rated load: 0.1 Hz.
  • Max. switching voltage, AC: 250 V.
  • Max. switching voltage, DC: 250 V.
  • Min. switching power: 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V.
  • Inrush current: 20 A / 20 ms.
  • AC switching capacity (resistive), max.: 1500 VA.
  • DC switching capacity (resistive), max.: 144 W @ 24 V.
  • Switch-on delay: ≤ 11 ms.
  • Switch-off delay: ≤ 40 ms.
  • Contact type: 1 CO contact (AgNi).
  • Mechanical service life: 5 x 106 switching cycles.

General data:

  • Operating altitude: ≤ 2000 m, above sea level.
  • Rail: TS 35.
  • Test button available: No.
  • Mechanical switch position indicator: No.
  • Colour: black.
  • UL94 flammability rating component:
    • Component: Housing.
    • UL94 flammability rating: V-0.
    • Component: Retaining clip.
    • UL94 flammability rating: V-0.

Insulation coordination:

  • Rated voltage: 300 V.
  • Pollution severity: 2.
  • Surge voltage category: III.
  • Clearance and creepage distances for control side - load side: ≥ 6 mm.
  • Dielectric strength for control side - load side: 4 kVeff / 1 Min.
  • Type of isolation at input and output: reinforced insulation.
  • Dielectric strength of open contact: 1 kVeff / 1 min.
  • Dielectric strength to mounting rail: 4 kVeff / 1 Min.
  • Impulse withstand voltage: 6 kV (1.2/50 µs).
  • Protection degree: IP20.

Further details of approvals / standards:

  • Certificate No. (DNV): TAA00001E5.
  • Certificate no. (cULus): E141197.

Connection data:

  • Wire connection method: Screw connection.
  • Stripping length, rated connection: 8 mm.
  • Tightening torque, max.: 0.4 Nm.
  • Clamping range, rated connection: 1.5 mm².
  • Clamping range, min.: 0.14 mm².
  • Clamping range, max.: 2.5 mm².
  • Wire connection cross section AWG, min.: AWG 26.
  • Wire connection cross section AWG, max.: AWG 14.
  • Wire cross-section, solid, min.: 0.14 mm².
  • Wire cross-section, solid, max.: 2.5 mm².
  • Wire cross-section, solid, min. (AWG): AWG 26.
  • Wire cross-section, solid, max. (AWG): AWG 14.
  • Wire connection cross section, finely stranded, min.: 0.14 mm².
  • Wire connection cross section, finely stranded, max.: 2.5 mm².
  • Wire cross-section, finely stranded, min. (AWG): AWG 26.
  • Wire cross-section, finely stranded, max. (AWG): AWG 16.
  • Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 0.25 mm²
  • Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 2.5 mm².
  • Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 0.25 mm².
  • Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 1.5 mm².
  • Wire connection cross section, finely stranded, two clampable wires, min.: 0.5 mm².
  • Wire cross-section, finely stranded, two clampable wires, max.: 1 mm².
  • Blade size: size PH0.
More Information
Brand Weidmuller
Write Your Own Review
You're reviewing:TRS 120VUC 1CO
Write your content here...
Back to Top