Specifications:

• Interface: Analog Current (4-20mA).
• Supply Voltage: 8 – 32 VDC.
• Current Consumption: Typical 20 mA @ 24 V (no load).
• Start-Up Time: < 500 ms.
• Max Load Resistance: 500 Ω.
• Analog Accuracy: ±20 µA @ 20 mA.
• Linearity: 0.15%.
• Settling Time: 32 ms (from min value to max value jump).
• Reverse Polarity Protection: Yes.
• Short Circuit Protection: Yes.
• EMC Compliance: Emitted Interference DIN EN 61000-6-4, Noise Immunity DIN EN 61000-6-2.
• MTTF: 278.3 years @ 40 °C.
• Sensor Specifications:
• Technology: Magnetic.
• Resolution: Single turn 13 bit.
• Accuracy (INL): ±0.0878° (≤ 12 bit).
• Code: Analog Current 4 – 20 mA.
• Cycle Time: Base Sensor < 100 µs.
• Minimum Measurement Range: 0 – 11.25°.
• Resolution of Output: Max. 13 bits over entire measuring range.
• Environmental Specifications:
• Protection Class (Shaft and Housing): IP68/IP69K.
• Operating Temperature: -40 °C to +85 °C.
• Humidity: 98% RH, no condensation.
• Mechanical Data:
• Housing Material: Steel.
• Housing Coating: Cathodic corrosion protection (>720 hrs salt spray resistance).
• Flange Type: Synchro, ø 36 mm Heavy Duty.
• Flange Material: Aluminium.
• Shaft Type: Solid, Length = 20 mm.
• Shaft Diameter: ø 10 mm (0.39").
• Shaft Material: Stainless Steel V4A (1.4112, 440 B), hardened.
• Max. Shaft Load: Axial 180 N, Radial 180 N.
• Minimum Mechanical Lifetime: 10 (180 N / 180 N), 15 (150 N / 150 N), 30 (100 N / 100 N) revolutions.
• Friction Torque: ≤ 5 Ncm @ 20 °C (7.1 oz-in @ 68 °F).
• Max. Permissible Mechanical Speed: ≤ 6000 1/min.
• Shock Resistance: ≤ 200 g (half sine 11 ms, EN 60068-2-27).
• Permanent Shock Resistance: ≤ 30 g (half sine 16 ms, EN 60068-2-29).
• Vibration Resistance: ≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6).
• Length: 56 mm (2.20").
• Weight: 210 g (0.46 lb).
• Electrical Connection:
• Connection Orientation: Axial.
• Connector: M12, Male, 5 pin, a coded.