Specifications:

• Interface: Analog Voltage (0-10 VDC).
• Supply Voltage: 8 – 32 VDC.
• Current Consumption: Typical 15 mA @ 24 V (no load).
• Start-Up Time: < 500 ms.
• Min Load Resistance: 5 kΩ.
• Analog Accuracy: ±10 mV @ 10 V.
• Linearity: 0.15%.
• Settling Time: 32 ms (from min value to max value jump).
• Reverse Polarity Protection: Yes.
• Short Circuit Protection: Yes.
• EMC Compliance: Emitted Interference DIN EN 61000-6-4, Noise Immunity DIN EN 61000-6-2.
• MTTF: 300.9 years @ 40 °C.
• Sensor Specifications:
• Technology: Magnetic.
• Resolution: Single turn 13 bit.
• Accuracy (INL): ±0.0878° (≤ 12 bit).
• Code: Analog Voltage 0 – 10 V.
• Cycle Time: Base Sensor < 100 µs.
• Minimum Measurement Range: 0 – 22.5°.
• Resolution of Output: Max. 13 bits over entire measuring range.
• Environmental Specifications:
• Protection Class (Shaft): IP65.
• Protection Class (Housing): IP65.
• Operating Temperature: -40 °C to +85 °C.
• Humidity: 98% RH, no condensation.
• Mechanical Data:
• Housing Material: Steel.
• Housing Coating: Cathodic corrosion protection (>720 hrs salt spray resistance).
• Flange Type: Synchro, ø 36 mm.
• Flange Material: Aluminium.
• Shaft Type: Solid, Length = 20 mm.
• Shaft Diameter: ø 10 mm (0.39").
• Shaft Material: Stainless Steel V2A (1.4305, 303).
• Max. Shaft Load: Axial 40 N, Radial 110 N.
• Minimum Mechanical Lifetime: 30 (20 N / 40 N), 10 (40 N / 60 N), 7 (40 N / 80 N), 3 (40 N / 110 N) revolutions.
• Friction Torque: ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F).
• Max. Permissible Mechanical Speed: ≤ 12000 1/min.
• Shock Resistance: ≤ 100 g (half sine 6 ms, EN 60068-2-27).
• Permanent Shock Resistance: ≤ 10 g (half sine 16 ms, EN 60068-2-29).
• Vibration Resistance: ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6).
• Length: 56 mm (2.20").
• Weight: 160 g (0.35 lb).
• Electrical Connection:
• Connection Orientation: Axial.
• Connector: M12, Male, 5 pin, a coded.