Back to Top
Ultra-compact control cabinet PC C6015-0030
Device type: Ultra-compact control cabinet PC
Housing: aluminum zinc die-cast housing
Installation: mounting sheet at the rear wall, mounting sheet at the side wall or for DIN rail
Slots for hard disk/flash: 1 slot for M.2 SSD
Cooling: passive with single side cooling plate
Free space for air circulation: 5 cm (2") on top and bottom of the PC required
Protection rating: IP20
Operating temperature: 0…50 °C
Dimensions (W x H x D): 82 x 82 x 40 mm (3.2" x 3.2" x 1.6"), without mounting plate
Processor: Intel Atom® x6214RE, 1.4 GHz, 2 cores (TC3:40), Intel Atom® x6416RE, 1.7 GHz, 4 cores (TC3:50)
Motherboard: compact motherboard for Intel Atom® x6000E
Memory: 4 GB DDR4 RAM, up to 8 GB DDR4 RAM ex factory
Graphic adapter: integrated in the processor
Ethernet: 2 x 100/1000BASE-T on-board
Hard disks/flash: 40 GB M.2 SSD, up to 320 GB M.2 SSD
Interfaces: 2 x USB 3.1 Gen. 2, 1 x DisplayPort
Power supply: 24 V DC, UPS
Operating system: Windows 10 IoT Enterprise
With a mounting space of just 82 x 82 x 40 mm, the C6015 Industrial PC represents Beckhoff's most compact entry-level Industrial PC and price savings of 25% or more (depending on the configuration) place it well below the previously least expensive x86 PCs. Due to its extremely compact size, the versatile and flexible mounting options and the impressive computing power of the Intel Atom® processors, it fits into virtually any control cabinet and machine concept. Apart from use for a wide range of automation tasks, the C6015 is mainly suitable for use as an IoT gateway, or as an edge device. The basis for this is the full integration and compatibility of TwinCAT and EtherCAT.
Performance classes and application areas
The C601x series offers Intel Atom® computing power for a wide range of automation and visualization tasks. Due to their impressive computing power in relation to their size, the PCs are mainly suited for use in Industrie 4.0 applications, for example as an IoT gateway.
Compactness
The C6015 is currently the smallest Beckhoff Industrial PC with a mounting space of just 82 x 82 x 40 mm.
Flexible mounting
In particular the wide variety of mounting options for the rear panel of the control cabinet or the DIN rail should be highlighted with this Industrial PC series. The connection level can be freely oriented, i.e. adapted to possibly specified cable layouts. Due to their maximum flexibility, the PCs fit in any niche in the control cabinet, however small.
Price-optimized
Due to the optimized housing and manufacturing concept, all Industrial PCs from the C60xx series are cost-optimized and are often less expensive in direct comparison with other series in the Industrial PC product area without restrictions in industrial compatibility, quality or durability.
All-in-one motherboard
The basic concept of the series always provides for an all-in-one motherboard developed and self-manufactured by Beckhoff. The single-board PCs are characterized by further improved robustness and durability. Modular, functional extensions in the form of a second board level can be integrated in every motherboard via an internal plug connector.
Write Your Own Review
Write your content here...
