UR20-3EM-230V-AC

ZAR 6,670.99
Out of stock
SKU
2007420000

Power measuring module:

  • Power measurement module for 1 or 3 phases with rated voltage up to 300 Veff.
  • The power module serves to measure and process currents & voltages of single-phase or three-phase loads up to a rated voltage of 300 Veff AC (phase & neutral conductor).
  • Numerous electrical metrics can be measured and computed immediately with the module, including phase angle, energy consumption, apparent, harmonic, and active power.
  • By employing parameters, it is possible to choose which data are sent across the different fieldbuses' process data.
  • The power measurement module can be simply linked into current automation solutions via u-remote.
  • No changes to the current installation are required when utilizing conversion current measurement transducers.
  • Currents up to 1 A or 5 A can be measured directly; greater currents can be measured using Weidmüller's plug-on or converter current measurement transducers.

Specification dimensions and weights:

  • Depth: 76 mm.
  • Depth (inches): 2.992 inch.
  • Height: 120 mm.
  • Height (inches): 4.724 inch.
  • Width: 11.5 mm.
  • Width (inches): 0.453 inch.
  • Mounting dimension - height: 128 mm.
  • Net weight: 90 g.

Temperatures:

  • Storage temperature: -40 °C - +85 °C.
  • Operating temperature: -20 °C - +60 °C.
  • Environmental Product Compliance:
  • REACH SVHC: Lead 7439-92-1.
  • SCIP: 82327f13-cd27-455a-ab5b-a62e1996dcf8.

Analogue inputs:

  • Analysis of harmonic: 31 (Blackmann-Harris Window).
  • Category for voltage measurements: CAT II (IEC 61010 Part 1).
  • Connectable converter ratios: 1 - 1000.
  • Frequency of the supply system: 45 - 65 Hz.
  • Input impedance voltage: 2.4 MΩ per channel.
  • Insulation: 1.5 kVeff.(input / system).
  • Measurement accuracy: 0.5% in relation to final value (U / I) 1% for the calculated values.
  • Measurement method: High Resolution Delta Sigma (current measurement in outer conductor).
  • Measurement resistance (shunt): 4 mΩ (at 5 A) 20 mΩ (at 1 A).
  • Module diagnosis: Yes.
  • Nominal peak voltage: 4 kV.
  • Number: 3.
  • Power rating: 0 - 1 A / 0 - 5 A AC.
  • Rated voltage: 300 Veff (L-N) 520 Veff (L-L).
  • Resolution: 16 bit per channel (internal 24 bit).
  • Sampling rate of current measurement: 3,300 samples/s.

Connection data:

  • Number: 3.
  • Type of connection: PUSH IN.
  • Wire connection cross section, finely stranded, maximum: 1.5 mm².
  • Wire connection cross section, finely stranded, minimum: 0.14 mm².
  • Wire cross-section, finely stranded, maximum (AWG): AWG 16.
  • Wire cross-section, finely stranded, minimum (AWG): AWG 26.
  • Wire cross-section, solid, maximum: 1.5 mm².
  • Wire cross-section, solid, maximum (AWG): AWG 16.
  • Wire cross-section, solid, minimum: 0.14 mm².
  • Wire cross-section, solid, minimum (AWG): AWG 26.

General data:

  • Air humidity (operation): 10% to 95%, non-condensing as per DIN EN 61131-2.
  • Air humidity (storage): 10% to 95%, non-condensing as per DIN EN 61131-2.
  • Air humidity (transport): 10% to 95%, non-condensing as per DIN EN 61131-2.
  • Air pressure (operation): ≥ 795 hPa (height ≤ 2000 m) as per DIN EN 61131-2.
  • Air pressure (storage): 1013 hPa (height 0 m) to 700 hPa (height 3000 m) as per DIN EN 61131-2.
  • Air pressure (transport): 1013 hPa (height 0 m) to 700 hPa (height 3000 m) as per DIN EN 61131-2.
  • Pollution severity: 2.
  • Rail: TS 35.
  • Shock: 15 g over 11 ms, half sinus wave, acc.to IEC 60068-2-27.
  • Surge voltage category: II.
  • Test voltage: 500 V.
  • UL 94 flammability rating: V-0.
  • Vibration resistance: 5 Hz ≤ f ≤ 8.4 Hz: 3.5-mm amplitude as per IEC 60068-2-6, 8.4 Hz ≤ f ≤ 150 Hz: 1 g acceleration as per IEC 60068-2-6.

Power supply:

  • Current consumption from IIN (the respective power segment): 12 mA.
  • Current consumption from Isys, typ.: 8 mA.
  • Voltage supply: 24 V DC +20 %/ -15 % via the system bus.

System data:

  • Configuration interface: Micro USB 2.0.
  • Field bus protocol: CANopen, DeviceNet, EtherCAT, EtherNet/IP, Modbus/TCP, PROFINET IRT, PROFIBUS DP-V1, POWERLINK.
  • Galvanic isolation: 500 V DC between the current paths.
  • Interface: u-remote system bus.
  • Module type: Functional module.
  • Process data: 32 Byte.
  • Transmission speed of system bus, max.: 48 Mbit.
More Information
Brand Weidmuller
Write Your Own Review
You're reviewing:UR20-3EM-230V-AC
Write your content here...
Back to Top