Dimensions and weights:

• Depth: 76 mm.
• Depth (inches): 2.992 inch.
• Height: 120 mm.
• Height (inches): 4.724 inch.
• Width: 11.5 mm.
• Width (inches): 0.453 inch.
• Mounting dimension - height: 128 mm.
• Net weight: 86 g.

Temperatures:

• Storage temperature: -40 °C... +85 °C.
• Operating temperature: -20 °C... +60 °C.

Environmental Product Compliance:

• REACH SVHC: Lead 7439-92-1.
• SCIP: 82327f13-cd27-455a-ab5b-a62e1996dcf8.
• RoHS Compliance Status: Compliant with exemption.
• RoHS Exemption (if applicable/known): 7a, 7cI.

analogue outputs:

• Accuracy: ±0,1 % FSR max., 0,05 % FSR typ.
• Actuator connection: 2-wire (automatic detection), 4-wire.
• Actuator supply:
• min.: 0 %.
• nominal: 185 %.
• max.: 185 %.
• Crosstalk between the channels in FSR: 0.001 %.
• Individual channel diagnosis: Yes.
• Load impedance current: < 600 Ω.
• load impedance voltage: > 1 kΩ (at >50 °C ambient temperature, max. total sensor current = 25 mA).
• Max. error between T min. and T max. in FSR: 220 %.
• Module diagnosis: Yes.
• Monotonicity: Yes.
• Number of analogue outputs: 4.
• Output current as per application:
• min.: 0 %.
• nominal: 185 %.
• max.: 185 %.
• Output variable: Voltage (0...5 V, 0...10 V, 1...5 V, 2...10 V, ±10 V, ±5 V) Current (0...20 mA or 4...20 mA).
• Repeat accuracy: < 1 mV eff.
• Resolution: 16 Bit.
• Response time: 1 ms / 4 channels.
• Short-circuit-proof: Yes.
• Simultaneity factor:
• min.: 0 %.
• nominal: 185 %.
• max.: 185 %.
• Substitute values: Yes.
• Temperature coefficient: 20 ppm voltage / 31 ppm current measurement / °K.
• Type: 1. U (0…5 V, 0…10 V, 1…5 V, 2…10 V, ±10 V), 2. I (0–20 mA or 4–20 mA).

Connection data:

• Type of connection: PUSH IN.
• Wire connection cross section, finely stranded, max.: 1.5 mm².
• Wire connection cross section, finely stranded, min.: 0.14 mm².
• Wire cross-section, finely stranded, max. (AWG): AWG 16.
• Wire cross-section, finely stranded, min. (AWG): AWG 26.
• Wire cross-section, solid, max.: 1.5 mm².
• Wire cross-section, solid, max. (AWG): AWG 16.
• Wire cross-section, solid, min.: 0.14 mm².
• Wire cross-section, solid, min. (AWG): AWG 26.

General data:

• Air humidity (operation): 10% to 95%, non-condensing as per DIN EN 61131-2.
• Air humidity (storage): 10% to 95%, non-condensing as per DIN EN 61131-2.
• Air humidity (transport): 10% to 95%, non-condensing as per DIN EN 61131-2.
• Air pressure (operation): ≥ 795 hPa (height ≤ 2000 m) as per DIN EN 61131-2.
• Air pressure (storage): 1013 hPa (height 0 m) to 700 hPa (height 3000 m) as per DIN EN 61131-2.
• Air pressure (transport): 1013 hPa (height 0 m) to 700 hPa (height 3000 m) as per DIN EN 61131-2.
• Pollution severity: 2.
• Rail: TS 35.
• Shock: 15 g over 11 ms, half sinus wave, acc. to IEC 60068-2-27.
• Surge voltage category: II.
• Test voltage: 500 V.
• UL 94 flammability rating: V-0.
• Vibration resistance: 5 Hz ≤ f ≤ 8.4 Hz: 3.5-mm amplitude as per IEC 60068-2-6, 8.4 Hz ≤ f ≤ 150 Hz: 1 g acceleration as per IEC 60068-2-6.

Power supply:

• Current consumption from IOUT (the respective power segment): 85 mA.
• Current consumption from Isys, typ.: 8 mA.
• Voltage supply: 24 V DC +20 %/ -15 %, via the system bus.

System data:

• Diagnostic data: 2 Bit.
• Field bus protocol:
• CANopen.
• DeviceNet.
• EtherCAT.
• EtherNet/IP.
• Modbus/TCP.
• PROFINET IRT.
• PROFIBUS DP-V1.
• POWERLINK.
• Galvanic isolation: 500 V DC between the current paths.
• Interface: u-remote system bus.
• Module type: Analogue output module.
• Process data: 8 Byte.
• Transmission speed of system bus, max.: 48 Mbit.