Specifications rating data IECEx/ATEX:

• Certificate No. (ATEX): DEMKO03ATEX136028U.
• Certificate No. (IECEX): IECEXULD13.0005U.
• Wire cross section max. (ATEX): 4 mm².
• Wire cross section max. (IECEX): 4 mm².
• Operating temperature range: For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity.
• Marking EN 60079-7: Ex eb II C Gb.
• Ex 2014/34/EU label: II 2 G D.

Safety notice:

• Installation instructions:
• The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust.
• For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7.
• For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.
• When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.
• Regarding accessory use, the manufacturer's instructions must be followed.
• List of restrictions:
• The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW.
• When used independently, the above-named components are not covered by this certificate.

System specifications:

• Version: for busbar 10 x 3 mm, For subsequently slewing-in.

Additional technical data:

• Installation advice Feed-through (bushing).
• Type of mounting when screwed in.

CSA rating data:

• Certificate No. (CSA): 12400-237.
• Wire cross section max. (CSA): 10 AWG.
• Wire cross section min. (CSA): 26 AWG.

Conductors for clamping (rated connection):

• Clamping screw M 3.
• Stripping length 16 mm.
• Tightening torque, max. 1 Nm.
• Tightening torque, min. 0.5 Nm.
• Type of connection Clamping yoke.
• Wire connection cross section, finely stranded, max. 4 mm².
• Wire connection cross section, finely stranded, min. 0.5 mm².
• Wire connection cross-section, solid core, max. 6 mm².
• Wire connection cross-section, solid core, min. 0.5 mm².

General:

• Installation advice Feed-through (bushing).

UL rating data:

• Certificate No. (UR): E60693.
• Conductor size Factory wiring max. (UR): 12 AWG.
• Conductor size Factory wiring min. (UR): 20 AWG.
• Conductor size Field wiring max. (UR): 12 AWG.
• Conductor size Field wiring min. (UR): 20 AWG.

Temperatures:

• Operating temperature range: For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity.

Material data:

• Material: Steel.
• Colour: Silver.