Timer/ Counter/ Tachometer VAC Flush Mounting TC-PRO483CRA-D

ZAR 1,532.73
Out of stock
SKU
TC-PRO483CRA-D

TC-PRO483 Series:

  • Highly visible display with backlit LCD
  • Conform to the key design of ergonomics.
  • Five key protection modes: KP-1~5
  • EEPROM (overwrites: 100,000 times min.)
  • 12VDC external supply power
  • Applied to connect PC/HMI/PLC/DCS
  • Free PC software “TC-SOFT”
  • Support Modbus Protocol
  • Support RS-232/485/422.

Specifications:

  • Classification: Digital Timer/ Counter/ Tachometer
  • Supported configurations: Timer, Dual Timer, 2-Stage Timer, 1-Stage counter, 2-Stage counter, total counter, batch counter, dual counter, twin counter, multi-mode, and tachometer.
  • Operating voltage range: 100~240VAC (50/60HZ), 24 VDC.
  • Installation: DIN rail or Flush mounting.
  • Max. counter speed: 30HZ/ 1KHZ/ 5KHZ (10KHZ for Tachometer)
  • Timer mode: Elapsed time (UP), Remaining time (down), (selectable)
  • Interface: RS-232/485/422

Input Method:

  • No-voltage input: ON impedance: 1kΩ max.
  • Voltage Input: High (logic) level: 4.5~30 VDC Low (logic) level: 0~2 VDC (Input resistance: approximately 4.7 kΩ)

Control output:

  • Relay contact output: 5A at 250 VAC.
  • Transistor output: NPN open collector, max. 100mA at 30VDC.
More Information
Brand Yottacontrol
Write Your Own Review
You're reviewing:Timer/ Counter/ Tachometer VAC Flush Mounting TC-PRO483CRA-D
Write your content here...
Back to Top